Any XLR Microphone, anytime you want to record.
The StudioSeries SSX1 XLR to USB interface is the ultimate preamp to to get your XLR microphones working directly with your Mac or PC.
The SSX1 supplies 48 volts of Phantom power, so you can easily record with any of your condenser or dynamic microphones. The SSX1 even features a headphone output which allows you to monitor your microphone during recording.
- Plugs directly into your Mac or PC
- Pre-amp and EQ Controls
- works with any XLR microphone
- provides phantom power
- Audio monitoring.
- Adjustable volume, highs, lows and gain.
- Easily fits in your pocket
- 2m USB cable included
Your SSX1 is made to the highest studio standards allowing for fully balanced low noise and perfect recordings every time. Perfect for multi track recording.
High and Low EQ and Gain Control
The SSX1 provides gain control and EQ control. The simple rollover controllers give one handed control over your input sound. Two separate faders control both the low and high pass filters, and one for your gain, as well as a 4th for your playback headphone volume.
- Sampling Rate: 16Bit/48 kHz
- ADC: 8, 11.025, 16, 22.05, 32, 44.1, 48kHz
- DAC: 32, 44.1, 48kHz
- Stereo ADC/DAC:
- ADC: THD+N=0.01%, SNR=89dB, Dynamic Range=89dB
- DAC: THD+N=0.005%, SNR=96dB, Dynamic Range=93dB
- Stereo Output Power:400mW
Buy yours now
There are 2 question(s) for this product.
Does it use a battery? With type? How is it Inserted?
By Kokrou on May 31, 2016
The XLR Convertor is powered over USB, so no battery is required.
One of the reviews mentions a problem which needs the user to change the setting in FCP 7 to 44,1KHz on the VO window and change, wait a second, then change back to 48K.
Obviously this is not ideal, especially in the rather stressful and time-limited working-environment I want to use it. I edit on FCPX. Does the same problem occur with this version as we'll? Is an updated version of the firmware available to solve this problem?
By JanW on August 16, 2016
I can confirm this is not the case the microphone records at 48K by default. I hope this helps.
Ask a question about this product below.
There are 2 review(s) for this product.
Amazing piece of kit
By: G74 on September 6, 2014
I had no problems setting this little gem up. For something so small, it really packs a substantial punch, can't believe the output is so clear and proffessional sounding. Easy to use, not a single problem with any of the features on my pc and the results are amazing. Thank your for supplying such a generously priced usb pre-amp.
SSX1 with FCP7
By: JCWS on May 31, 2014
This is a very nice unit. But on Mac Book Pro with FCP 7 however in the Voice over option I have found there is a conflict with this program that causes distortion. The work around I have found is to select 44,1KHz on the VO window and change, wait a second, then change back to 48K then its OK edit a bit more then you have to do it each time for a new VO. This is a good unit but there's something in the software that's not right. My other units (Edirol UA25) does not suffer this problem. Other wise its great!
Write a review for this product below.
|Compatible With||Audio Editing|