Vocal Booth Pro Instructions
First of all, grab the microphone extender rod, (Pic 1). You will need to place this on the top of the Vocal Booth Stand screw mount, which pokes out of the top of the microphone stand.
At the lower part of the Vocal Booth, in the centre, you will find a screw hole. Simply screw this directly on top of the microphone stand, taking care to support the vocal booth head unit as you screw it securely into place (As show in Pic 3).
Fix the mounting bar (Pic 1) into the microphone extender slot, putting a washer on each side, and fasten the black screw. The thin side should end up in the centre of the Vocal Booth allowing you to secure your own shockmount (see Pic 4 for example).
First of all, grab the microphone extender rod, (Pic 1).
Place the hole on the microphone extender bracket over the attached desk stand screw, then screw the into the centre-bottom of the vocal booth, until tightly fast.
Fix the mounting bar into the microphone extender’s slot, putting a washer on each side, and fasten the black screw. See Pic 3.
Your microphone can then be attached to the mounting bar, and you’re ready to go!